LEI – PUMP – 001117 NEW Q300 5L Unitized Quintaplex Plunger Pump

New Unititized Surplus Quintaplex Pump (Unitized pump only/Building and Piping package not included)

• 300Q-5L PUMP APPLICATION DATA
• LIQUID – Crude Oil (slightly sour)
• FLOW RATE – 22.5 – 84.5 m3/hr
• SUCTION PRESSURE – 225 kPag (32.6 psig)
• DISCHARGE PRESSURE – 7667 kPag (1112 psig)
• REQUIRED HP 274 HP (300 HP Installed)
• S.G. – 0.81 – 0.86
• VISCOSITY – 5 – 15 cSt @ 10°C
• TEMPERATURE – 5 – 20°C
• NPSHa – Assumed 87.6 ft (client to confirm)
• NPSHr – 30 ft of head @ 376 RPM utilizing 3.5″ plungers
• H2S % – Assumed Trace Amounts (less than 500 ppm)
• SOLIDS (TYPE/SIZE) – Assumed Minimal
• AREA CLASS – CSA Class I Division II, 480V
• SERVICE DUTY – Assumed Continuous (more that 4 hours per day average runtime)
• CONTAMINANTS – Trace Amount of H2S and Wax May be Present

NATIONAL OILWELL 300Q-5L QUINTUPLEX PLUNGER PUMP INCLUDES:

•     – 3.500″ TUNGSTEN CARBIDE PLUNGERS
•     – NICKEL ALUMINUM BRONZE FLUID END
•     – NICKEL ALUMINUM BRONZE STUFFING BOXES
•     – 8.0″ ANSI 150# FF SUCTION FLANGE AND 4.0″ API 2000# RJ DISCHARGE FLANGE
•     – NITRONIC 50 SPHERICAL VALVES, VALVE SEATS, AND INCONEL VALVE SPRINGS
•     – 838 GENERAL SERVICE PACKING
•     – NON-DRIVE END CRANKSHAFT CONE
•     – SPRING LOADED SWING HATCH CRADLE COVER C/W SEAL LIP TO PREVENT
•        ELEMENTS (RAIN / SNOW)  FROM LEAKING INTO CRADLE AREA
•     – 2.0″ THREADED PIPING DRAIN LOCATED FROM BOTTOM OF CRADLE AREA TO SKID EDGE
•     – SECONDARY POWER END OIL SITE GLASS MOUNTED ON NON-DRIVE END SIDE FROM
•        1.0″ NPT CONNECTION ON BACK SIDE OF THE PUMP POWER END

5-FEED PLUNGER LUBRICATOR IS NOT REQUIRED – FLUID MEDIUM IS OIL

TECO WESTINGHOUSE OPTIM HE PLUS PREMIUM EFFICIENCY ELECTRIC MOTOR

•     – MODEL PDH30006RM
•     – 300 HP, 3PH/60HZ/460V, 1200 RPM, TEFC ENCLOSURE, 1.15 S.F. (1.0 S.F. VFD)
•     – HEAVY DUTY ROLLER BEARINGS
•     – NON DRIVE END INSULATED BEARINGS
•     – FRAME SIZE 449T
•     – CLASS F INSULATION
•     – CLASS I DIVISION II CLASSIFICATION, VFD COMPATIBLE

UPGRADED STANDARD JUNCTION BOXES TO DUAL ENTRY BOXES

•     – 2x 3″ NPT MAIN TERMINAL BOX TBN449T/500D

REAR MOUNT, V-BELT DRIVE, PUMP UNITIZATION SKID INCLUDES:

•     – CARBON STEEL PUMP SKID AND V-BELT GUARD
•     – MOTOR/PUMP ALIGNMENT
•     – QTY (4) LIFTING LUGS (INCLUDES 100% MPI INSPECTION ON ALL LUG WELDS)
•     – SAND-BLASTED AND PAINTED BLACK IN COLOR IN ACCORDANCE TO CSM
•       FABRICATION PAINT SPEC

ALUMINUM V-BELT GUARD FACE ONLY

•     -LIGHT WEIGHT GUARD FACE FOR EASY ON-SITE REMOVAL

V-BELT DRIVE FOR THE SELECTED NATIONAL OILWELL PUMP AND MOTOR

•     – THE PUMP WILL BE SIZED FOR APPROXIMATELY 376 RPM THEREFORE A SHEAVE TURN DOWN RATIO OF APPROXIMATELY 3.12:1 WILL BE SUPPLIED

COORSTEK SUCTION DAMPENER

•     – MODEL NUMBER MM-1508-F
•     – 900 CUBIC INCH, BUNA BLADDER
•     – 8.0″ ANSI 150# FLANGE (MAWP 150 PSI)
•     – INTERNALLY COATED WITH SCOTCH KOTE 134
•     – C/W CRN REGISTRATION NUMBER

COORSTEK DISCHARGE DAMPENER

•     – MODEL NUMBER T-14004-F
•     – 600 CUBIC INCH, BUNA BLADDER
•     – 4.0″ ANSI 600# FLANGE (MAWP 1400 PSI)
•     – INTERNALLY COATED WITH SCOTCH KOTE 134
•     – C/W CRN REGISTRATION NUMBER

METRIX VIBRATION TRANSMITTER

•     – MODEL ST5484E-121-02-000
•     – 1.0 IPS (25mm/s) PEAK
•     – 1/4″ NPT CONNECTION, CLASS 1 DIVISION 1, EXPLOSION PROOF
•     – 0-20 mA
•     – INSTALLED

MURPHY COMBINATION LIQUID LEVEL GAUGE AND LOW LEVEL SWITCH:

•     – (TO MONITOR CRANKCASE OIL LEVEL):
•     – MODEL EL-150EX, EXPLOSION PROOF ENCLOSURE
•     – INSTALLED

LONG TERM STORAGE PREPARATION INCLUDES:

•     – RECOMMENDED FOR STORAGE DURATIONS OF 3 MONTHS AND BEYOND
•     – THE INTERNALS OF THE PUMP POWER ENDS TO BE COATED WITH NATIONAL OILWELL VARCO’S APPROVED SRPO 655 VP RUST INHIBITOR
•     – PUMPS AND MOTORS TO BE WRAPPED WITH HEAVY DUTY 6 MILL POLY WRAP TO MINIMIZE MOISTURE CONTAMINATION

Immediate Delivery! LEI has an MCC/VSD that is a perfect fit for this pump!

Located in Edmonton.

Call for Pricing today!